The Festool Kapex KS 120 Sliding Compound Miter Saw has been designed to be on the cutting edge of today’s market. It has been built to function with precision in a workshop or on a jobsite. The dust removal system, lightweight, and compact design are just some of the features which will put this saw on the top of almost every professional tradeperson’s list.
Festool Kapex KS 120

Festool Kapex KS 120 Sliding Compound Miter Saw Features

  • 10-1/4“ Carbide blade
  • Blade wrench
  • FastFix blade change system
  • Hold-down clamp
  • Angle transfer tool
  • Dual-laser siting
  • Nested crown capacity: 6-5/8”
  • Miter range: 0-50 degrees (left), 0-60 degrees (right)
  • Bevel range: positive locks at 0 and -45 degrees; free maneuvering -45 and +45 degrees; free maneuvering up to +/-47 degrees
  • Cutting depth 90 degrees/ 90 degrees: 12” x 3-15/32”
  • 1600 Watts direct-drive motor features MMC electronics
  • Speed: 1,400-3,400 RPM
  • Dimensions: 28” W x 19-3/4” D x 18-1/2” H
  • Weight: 47 pounds
  • Dust port with integrated dust removal system
  • 30-day money back guarantee
  • 3-year limited warranty

The Festool Kapex KS 120 Sliding Compound Miter Saw not only offers lightweight, compact tool. It has a host of features which will provide professionals with clean, precision cutting options almost anywhere. This saw has been crafted from a sturdy, yet light Magnesium alloy and has a well-designed range of adjustment and lock options, along with safety, storage and tool life-prolonging innovations. This tool was meant to produce accurate cutting results with minimal frustration and dust inconvenience, and be taken on site when necessary.

Dual-laser Design for Precision Cutting

The lasers on this Festool miter saw allow the cuts to be delineated on the left or right side of the tool. The three axis controls allow for easy adjustment and more accurate cutting results. The lasers are operated electrically and can be activated before powering on the saw. The center position of the handle makes operating the saw possible for either hand. The trigger has a two-phase start which keeps accidental starts at bay.

Bevel Adjustment and Bevel Lock

Bevel adjustment on the Festool Kapex KS 120 is made easier and more precise, thanks to the counter spring balancing. This allows for the bevel to be set at any angle and the head will remain in that position without having to be locked in place. The bevel settings are located on both sides of the saw for faster reference. The use of the micro adjustment knob enables extremely accurate bevel setting at fractions of a degree. The bevel lock knob has positive lock positions at 0 and -45 degrees, a free maneuvering range of -45 degrees through +45 degrees, and a free maneuvering range up to +/- 47 degrees. Bevelling is possible on either side of this saw.

Miter Scale and Lock, and Angle Transfer Tool

The etched readings on the stainless steel miter scale enable easy viewing of angles up to 50 degrees on the right, and up to 60 degrees on the left. The design of this scale makes it possible to make extremely precise set ups. The design of the miter lock prevents slipping even near a positive lock position. The angle transfer tool makes the transfer of both inner and outer angles of the work surface to the Kapex fast, accurate, and easy.

Rail-Forward Setup and Keyed Clamp

The Festool Kapex KS 120 holds work in place with a rugged, slip-free, keyed clamp for ease of insertion and removal of work pieces. The cam-lock keeps the clamp in position and work piecs are protected via a rubber pad. The oblong foot of the clamp offers a flat surfacefor placement against the fence of the saw. The rails of the saw are positioned at a wide distance apart, which prevents head play and enables precision cutting in smaller workspaces. It can even be used while against a wall.

Blade Versitility, FastFix Blade System, and Unusual Cutting Positions

The noise-reducing, vibration-minimizing blade of this saw makes a slender kerf, which lessens the motor load and increases the quality of the cut. The size of the arbor hole lessens blade deviation. There is access to an unusual cutting position, which allows the back section of the blade to be more effectively utilized. This way 6-5/8” crown molding can be cut as well as work pieces with a vertical measurement of up to 4-3/4” x 3/4”. This saw even has the ability to cut trenches in materials. The FastFix blade change system is intuitive, quick, safe, and easy. The FastFix control locks the arbor and trigger to prevent accidental startups. The blade can then be changed safely and quickly, without damage to the blade or the saw.

Direct-Drive Motor and MMC Electronics

The 1,600-watt direct-drive motor of the Festool Kapex KS 120 has a speed range from 1,400 to 3,400. The MMC electronics delivers consistent blade speed under use. The speed range control makes sure that the blade speed can be matched up with the type of material being cut, which keeps the motor from damage or overwork. A side chart gives quick reference for appropriate speed settings based on the material to be cut.

Dust Removal System and Cord Storage

This Festool miter saw has a swiveling dust port which guides dust away from the work surface and worker to enable faster cleanup, provide a safer work environment, and prolongs the life of the tool. This port excepts two sizes of hose and can be used with the Festool CT dust removal system to rid the area of 91% of the dust. There is integrated storage for the power cord and the arbor.

The majority of users really love the Festool Kapex KS 120 Sliding Compound Miter Saw, but it is a steep price and some of its features take some time to become familiar. It is definitely for professional level craftspeople and a reviewer or two has had a safety issue with this tool. Reading some online customer reviews will give potential buyers a more in depth view of this saw’s performance.

Model
Price
Festool KS 120 EB
$1,375.00 from Amazon

Category: Miter Saw Reviews

Tags: